欧洲华人汽车工程师协会

 

 

搜索

2012海外校园华人汽车人才需求目录(1)

收藏 分享 9.2.2012 00:00| 发布者: ecsae| 查看数: 7235| 评论数: 0|来自: ecsae

摘要: 2012海外校园华人汽车人才需求目录(1),招聘联系人: 汤海山副秘书长,中国汽车人才研究会, 地址:上海国际汽车城大厦19层,(上海市嘉定区安亭镇墨玉南路888号),邮编:201805, 电话:021—33510525
 
海外校园华人汽车人才需求目录 Part2
序列
No
区域
Area
岗位
Position
素质要求(能力、原岗位性质、工作经验、项目经验等)
Qualitification (Competency, working experience, program experience)
1 T&V-structure lab 底盘结构试验工程师 chassis structre test engineer (1).3年以上六自由度多轴试验平台(或小型多轴平台)的系统台架GMW规范的试验经验.(2). 熟悉包括悬挂和排气等主要系统的台架试验方法。    (1).At least 3 years project work experience in 6DOF MAST(or MINI MAST) system GMW procedure tests.   (2). familiar with the system rig tests such as  multi-axial and exhaust system, etc.
2 T&V-structure lab 车身结构试验工程师 body structure test engineer (1).具有3年以上车身门盖系统\摇窗机系统的试验经验。 (2).熟悉电动滑移门,电动尾门的台架试验方法。                               (1).At least 3 years work experience in door slam and window regulator tests.   (2). familiar with power sliding door, power decklid slam tests.
3 T&V-NVH lab 振动噪声试验技术专家
NVH Test Expert
至少10NVH试验工作经验;擅长数据分析和试验方案的确立;善于表达和交流,能够清晰准确地传授测试技术
More than 10 years NVH test experience; be good at data analysis and test design; expressivity and good communication, be able to train test technology clearly
14 T&V 系统认证工程师
System Validation Engineer
有整车架构零件开发和认证的项目工作经验,尤其是底盘结构件的认证经验。原岗位性质最好为GM系统认证工程师/专家。
Good working experience with vehicle architecture development and validation. Chassis TIE is prefer.
       
15 PT-Engine Engrg Head port, Combustion (include SIDI) & performance development specialist;
 
发动机缸盖进排气道,燃烧室(包括直喷)及性能开发专家
Be proficient in gasoline cumbustion system design, development, analysis, improvement. Has SIDI engine design & development experience.
精通汽油发动机燃烧系统的设计开发及分析改进,有直喷的发动机设计开发经验
2 PT-Engine Engrg DSE with experience on Turbo/SIDI;
有增压/直喷经验的发动机设计系统工程师
2> DSE with experience on Turbo/SIDI;
有增压/直喷经验的发动机设计系统工程师
3 PT-Engine Engrg Converter specialist
;
三元催化专家
Be proficient in converter canning design, substrate size definition, PGM loading definition, analysis, and validation.
精通发动机的三元催化剂封装设计,载体大小的定义,贵金属含量的定义等的分析及论证.
4 PT-Engine Engrg Sealing specialist
密封专家
Be proficient in gasoline engine gasket/sealing design ,development & analysis.
精通汽油发动机的垫片及密封的设计开发分析.
5 PT-Engine Engrg Valvetrain / Timing train(VVT, VVL) specialist
气门总成/正时总成(可变气门正时,可变气门升程)专家
Be proficient in gasoline engine valvetrain, timingtrain design & development, especially the cam profile design to the engine performance, including VVT, VVL
精通汽油发动机的气门总成,正时总成设计开发,特别是凸轮型线对发动机性能的设计,包括可变气门正时,可变气门升程.
6 PT-Engine Engrg Cranktrain rotating specialist
曲轴旋转系统专家
Be proficient in gasoline engine cranktrain rotating system design & development.
精通汽油发动机曲轴旋转系统的设计开发
7 PT-Engine Engrg Cranktrain reciprocating specialistpiston asm & con rod)
曲轴往复系统专家(活塞总成及连杆)
Be proficient in gasoline engine cranktrain reciprocating system(Piston Asm & Con Rod) design & development.
精通汽油发动机曲轴往复系统的设计开发(活塞总成及连杆)
8 PT-Engine Engrg Lubracating/Ventilation specialist
发动机润滑/通风专家
Be proficient in lubracating & ventilation system design and development, especially the oil pump & cam cover design.
精通发动机润滑及通风系统的设计开发,特别是机油泵及凸轮罩壳的设计.
9 PT-Engine Engrg Cooling specialist
发动机冷却系统专家
Be proficient in cooling system design and development, especially the water pump design.
精通冷却系统的设计开发,特别是水泵的设计
10 PT-Engine Engrg FEAD specialist
前端驱动系统专家
Be proficient in FEAD system design and development, especially the tensioner design.
精通发动机前端曲轴系统设计开发,特别是张紧器的设计.
11 PT-Engine Engrg Air delivery specialist发动机空气输送系统专家 Be proficient in all air delivery system design, especially intake manifold tuning, design & development.
精通发动机空气输送系统的设计,特别是进气歧管的谐振的设计开发
12 PT-Engine Engrg After treatment specialist
发动机后处理专家
Be proficient in all after treatment design, especially casting & fabricated exhaust manifold design.精通发动机的后处理的设计,特别是铸造及组合式的排气歧管的设计
13 PT-Engine Engrg Engine controlling/controller specialist
 发动机系统控制系统/控制器专家
Be proficient in engine controlling system components & controller applicating & development.
精通发动机的控制系统的零件及管理运用及开发
14 PT-Engine Engrg  Fastener specialist
紧固件专家
Be proficient in all fasteners applied on powertrain.精通动力总成的紧固件
16 PT-Calibration PTEI specialist 动力总成通讯专家 Be proficient in PTEI and system 0 software background
17 PT-Calibration GF6 Calibration Specialist GF6变速箱标定专家 Transmission calibration especially GF6 calibration
17 PT-Engine Dev & Vailidation Engine development and validation specialist
发动机试验开发和认证
 Be proficient in engine development and validation, good experince of test spec develop.
18 PT-CAE Engine performance/CFD simulation specialist 发动机性能/CFD仿真专家  Be proficient in engine performance or CFD, good experince on test develop to confirm the simulation result.
19 PT- Transmission MT develop and shift quality specialist 手动变速箱开发和换档专家 Be proficient in MT develop, especially shift quality improvement
       
20 Interior AVD Interior AVD Engineer 具有GM AVD Interior 安全工程背景
21 VI/T&V Architecture Mule lead engineer/technician Rich experience in Architecture Mule design, mock-up and manufacturing. At least with experience of making 2 mules.
具有在
design,mockup, man丰富经验,至少两个Mule制作experience

鲜花

握手

雷人

路过

鸡蛋

Archiver|欧洲华人汽车工程师协会

GMT+1, 29.3.2024 13:14 , Processed in 0.314815 second(s), 10 queries .

© 2011 ECSAE e.V. 欧洲华人汽车工程师协会